Aren’t cadence magnets a thing of the past?

The built in cadence sensors within the InfoCrank power meter operate using extremely fast acting reed switches. The magnetic sensor is more accurate, consumes less power, and has faster start up and response times than other methods of measuring cadence.  Alternative...

What does the LED light signify?

FAST FLASHING, NON-STOPThis is a mode called Boot Loader. If the crank is left in Boot Loader mode, the batteries will drain fast, the head unit will not connect and power will not be recorded. Boot Loader mode is used in firmware updates, and in some cranks, turns on...

My InfoCrank is showing wrong or no cadence and/or power numbers.

In many cases all you need to do is remove the batteries and re-install them. Be sure your batteries are SR44 and have enough charge. Wrong batteries and low charge have a huge effect on proper measurement!In some cases a re-zeroing solves the problem. To calibrate...

How do I know what spacers or washers to use?

Having trouble figuring out what spacers or washers to use with your new Ceramic Speed M30 bottom bracket? We know it can be bit of a learning curve, but the M30 Ceramic Speed BB is pretty simple.  Make sure it has been properly pressed into your frame. If you...

Front derailleur isn’t shifting well?

Front derailleur needs to be adjusted if the customer has changed chainring sizes. For example: Went from Standard Compact 50/34 to Professional Compact 52/36 or visa versa. Check chainrings to be sure they are properly installed. See Praxis chainring guide...

Product Warranty & Repair Process

Please review the warranty terms below.Obtain warranty service in 3 easy steps:Register – Visit the Verve Support webpage to register your InfoCrank.Request a repair – On the Support Portal create a ticket and give us as much information about your issue...
0
    0
    Your Cart
    Your cart is emptyReturn to Shop